Yocto setup for secure boot build

Note

See the i.MX Yocto Project User’s Guide (UG10164) for how to set up and build Yocto project.

To set up the Yocto project for secure boot build, perform the following steps:

  1. Set up Yocto Build Environment and Configuration.

Note

If the manifest file does not exist for a specific release, set up the Yocto build according to the i.MX Yocto Project User’s Guide (UG10164) and download the meta-nxp-security-reference-design meta layer from https://github.com/nxp-imx-support/meta-nxp-security-reference-design/ in the sources directory. Then proceed with following step 1.

repo init -u https://github.com/nxp-imx/imx-manifest -b imx-linux-walnascar -m imx-6.12.49-2.2.0_security-reference-design.xml
repo sync
DISTRO=<DISTRO> MACHINE=<MACHINE> source imx-setup-release.sh -b <build directory>
  1. Add the meta-secure-boot layer to the Yocto project.

bitbake-layers add-layer ../sources/meta-nxp-security-reference-design/meta-secure-boot
  1. Add CST or SPSDK in SIG_TOOL_PATH in local.conf.

Note

The absolute location of CST or SPSDK is required.

echo "SIG_TOOL_PATH = \"<path to cst package/spsdk binary>\"" >> conf/local.conf
  1. (Optional) Add the keys and crts directories in local.conf.

Note

The absolute location of the folder containing the keys and crts folders is required. If SIG_DATA_PATH is not provided, the SIG_TOOL_PATH env value is used.

echo "SIG_DATA_PATH = \"<keys and crts folder>\"" >> conf/local.conf